Builders Adhesive
Builders Adhesive Sealant: Strong Construction Grab Bonding
Adiseal builders adhesive provides a strong adhesive bond on many different construction materials. It has high initial grab as well as providing a flexible, waterproof and durable adhesive bond in building material bonding applications. Adiseal has also been shown to be the strongest adhesive in an independent adhesive strength test.
What is the best builders adhesive?
In an independent strength test of construction adhesives conducted by Ultimate Handyman in the UK, Adiseal emerged as the top-performing adhesive. Its exceptional heavy-duty performance outstripped all competitors, showcasing more than three times the strength of the next best product.
The test had to be halted as the screws securing the metal sheet started to tear out, and the hydraulic ram seal even gave way due to Adiseal’s immense strength, surpassing the test rig’s capacity to handle it.
Strongest building adhesive test results
“That is actually unbelievable!”
Ultimate Handyman
Testimonials
Applications & Benefits
How to use builders adhesive
How to use builders adhesive
- Surface Preparation
Ensure that the surfaces to be bonded are clean, dry, and free from dust, grease, or any contaminants. If necessary, roughen or clean the surfaces for better adhesion.
- Cut the Cartridge
If you are using a cartridge-based construction adhesive, use a utility knife to cut off the tip of the cartridge. The size of the opening will depend on the desired bead size and the project requirements.
- Apply Adhesive
Apply the builder’s adhesive to one of the surfaces in beads or dots, depending on the recommended application method specified by the product.
- Press Surfaces Together
Firmly press the two surfaces together, applying even pressure to ensure proper contact and bonding.
- Support or Clamp
Depending on the weight or the nature of the bonding materials, you might need to use clamps or supports to hold the surfaces together while the adhesive sets. Follow the manufacturer’s recommendations for curing time and any additional support required during this period.
- Curing Time
Allow the adhesive to cure as per the instructions provided by the manufacturer. Avoid subjecting the bonded surfaces to stress or load until the adhesive has fully cured.
Tip: To store Adiseal once opened, leave about 1cm worth of product out of the nozzle and store the tube upright in a cool dry place. Adiseal requires moisture for it to cure. The exposed part out of the nozzle will cure creating a cap. To re-use Adiseal, pull the cured part out or cut the nozzle until the uncured part is reached.
Data Sheets
Colours
Adiseal adhesive and sealant is available in the following colours:
- White adhesive and white sealant
- Black adhesive and black sealant
- Grey adhesive and grey sealant
- Clear adhesive and clear sealant
- Brown adhesive and brown sealant
Adiseal can also be manufactured in any RAL colour.
Where to buy builders adhesive
To buy builders adhesive in the UK, please contact us for your nearest stockist. For customers outside of the UK, you can buy Adiseal construction adhesive from your local distributor. If there is no distributor in your country, visit www.guglue.com for worldwide shipping.
Frequently asked questions about builders adhesive
Adiseal has been shown to be the strongest builders adhesive in an independent adhesive strength test carried out by Ultimate Handyman. Adiseal was shown to be over 3 times stronger than the next best product.
Builder’s adhesive is commonly used in construction for bonding various materials like wood, concrete, metal, and more. It’s utilized to join surfaces together permanently or semi-permanently.
Some builder’s adhesives like Adiseal are suitable for outdoor applications, but it’s essential to check the product specifications to ensure it’s designed for outdoor use and can withstand weather conditions.
Adiseal builder’s adhesive is formulated to be waterproof or water-resistant, making it suitable for damp or wet environments.
Suhail Matadar
Suhail Matadar has extensive experience in the construction industry as an electrician, involved in installing, inspecting, and testing electrical systems in various projects. He excelled in sales, working for a major UK wholesaler, selling construction products to professionals and the DIY market. Suhail's background includes working at a leading home emergency repair company dealing with trades people. With a BEng (Hons) degree in Electronic Engineering, Suhail has worked with PLCs in the nuclear fuel manufacturing industry. During his studies, he gained practical experience at a chemical manufacturing company known for producing award-winning cleaning, hygiene, and livestock protection products for over a century. Currently, Suhail runs a global business specialising in supplying, researching, testing, and distributing chemical construction products like adhesives and sealants.